Pro-Ject Xtension 12 Turntable

- A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt. 
- Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually. 
- The medium density fibre plinth rests on four individually height-adjustable magnetic field feet. A build in spirit 
level allows easy adjustment of the chassis. 
- The resonance-optimised platter is a sandwich construction utilising a fine-balanced and damped aluminium 
platter weighing 5,7kg and a 4mm thick flat-ground layer of vinyl and a brass record puck. 
- The magnet supported, inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic 
bearing plate runs. 
- Central metal block optimises centre of gravity and damps main bearing. 
- External power supply avoids potential electro-mechanical interference. 
Tonearms Pro-Ject 12cc Evolution 
- The headshell and armtube are fashioned from a single piece of carbon-fibre. 
- Conical armtube avoids standing wave reflections. 
- Inverted bearing design with four ABEC7 spec ballraces. 
- Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. 
- Sorbothane-damped counterweight effectively counteracts unwanted resonances. 
- Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). 
- Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- High quality interconnect cable Pro-Ject Connect it 5P-C (123cm length) included.

Technical Specifications:

Drive Principle: Perimeter Belt Drive
Speeds: 33, 45 & 78 RPM
Speed Variance (33 RPM): 0.09 %
Speed Variance (45 RPM): 0.09 %
Wow and Flutter (33 RPM): 0.01 %
Wow and Flutter (45 RPM): 0.01 %
Motor: 9V AC
Turntable Signal to Noise Ratio: 73 dB
Main Bearing: Inverted Ceramic Ball
Main Platter Material: Vinyl-Topped Aluminium with TPE Lining
Main Platter Weight: 10.1 kg
Plinth Material: Metal-Packed MDF
Tonearm Type: Adjustable
Tonearm Material: Carbon Fibre
Effective Tonearm Length: 304.8 mm
Overhang: 13.2 mm
Effective Tonearm Mass: 10.5 g
VTA Adjustment: Yes
Output Connection: 5-Pin Connector
Output Level: Phono Level
Maximum Power Consumption: 2 W
Dimensions (W x H x D): 550 x 250 x 450 mm
Weight: 22 kg